Mine Submersible Pump

30 years professional submersible pump manufacturer in China

Now looking for global Mine Submersible Pump distributor,with high quality pump,intimate service and big market prospects.

Mine Submersible Pump

Home > Products > Submersible pump > Mine Submersible Pump

Mine Submersible Pump

Flow:100m3/h~2500 m3/h
Lift:10m~800m
Caliber:φ175-φ800mm
Power:7.5kw~4200kw
Temperature:≤120℃
Qualitycertificate:One year warranty and lifelong maintenance
 
Skype : dragonpumps dragonpumps
E-Mail : enquiry@apkpump.com
Whatsapp/Wechat : 0086-17537187726
Get Quotation    Leave Message

   Due to the new bearing structure and materials, it can bear large axial force and ensure the service life of submersible motor. When the motor power is greater than 600kW, a small impeller is set at the lower end of the rotor to make the cooling water in the motor circulate automatically and improve the cooling effect. When the motor power is less than 600kW, the rotor is equipped with spiral water tank, which can also ensure the cooling effect.

Mine submersible pump features:

1. High safety and reliability: the pump and supporting submersible motor are designed and used on the premise of diving into the water.

2. High efficiency, energy saving and high degree of automation: the surface is powered separately, and multi-functional detection and control can be realized on the ground. The electric pump is equipped with multiple monitoring and protection, which is easy to implement intelligent monitoring, remote control and network management.

3. The water pump unit can be used vertically, obliquely and horizontally

4. Easy installation and operation

Mine submersible pump working conditions:

1. Water temperature not higher than 25℃

2. The content of solid matter in water shall not be greater than 0.5% 0 (Note: the content of solid matter in water shall be indicated in the contract so that the manufacturer can choose the shaft extension sealing method.)

3. The water velocity on the surface of the motor shall not be less than 0.5m/so. The motor shell is provided with an anti seawater coating. Pay attention not to scratch the coating when going into the seawater. The motor can work in the seawater for up to 3 months at a time. After the work expires, the motor must be lifted out of the seawater, and the coating must be carefully checked for falling off and damage. If any, the coating shall be brushed after being cleaned and decontaminated with clean water, The corrosion of the zinc plate at the motor base shall be checked, and it shall be replaced in time before it is put into the sea.

(1). Coating material: type B epoxy coal asphalt primer (the first coat)

(2). Type B epoxy coal tar pitch enamel (2nd coat)

4. The pump suction port is 2 meters below the water surface.

5. The rotation direction of the pump is clockwise when viewed from the coupling end to the pump.

mine-submersible-pump.jpg

Notes for mining submersible pump:

1. The motor must be filled with water.

2. The instructions must be read before installation and use.

3. Ensure the flow rate of water on the surface of the motor. If it cannot be guaranteed, install a deflector (cooling water cover).

4. The electric pump must be reliably grounded for non well applications.

5. The electric pump must fully submerge into the water, and the minimum water level shall be 2m higher than the pump inlet during operation.

6. If it is necessary to test run the submersible pump on the ground, the pump cavity must be filled with water or other lubricating fluid. Otherwise, the sliding bearing will be damaged.

Mine Submersible Pump model parameter

Model Flow Lift Power Diameter
460QK40-765 40 765 220 460
460QK40-714 40 714 200 460
460QK40-663 40 663 180 460
460QK40-612 40 612 160 460
460QK40-561 40 561 140 460
460QK40-510 40 510 140 460
460QK40-459 40 459 120 460
460QK40-408 40 408 100 460
460QK40-357 40 357 87 460
460QK40-306 40 306 75 460
460QK40-255 40 255 55 460
460QK40-204 40 204 45 460
460QK40-153 40 153 37 460
460QK40-102 40 102 30 460
460QK30-1210 30 1210 410 460
460QK30-1155 30 1155 410 460
460QK30-1100 30 1100 350 460
460QK30-1045 30 1045 350 460
460QK30-990 30 990 300 460
460QK30-935 30 935 300 460
460QK30-880 30 880 260 460
460QK30-825 30 825 220 460
460QK30-770 30 770 200 460
460QK30-715 30 715 180 460
460QK30-660 30 660 160 460

You May Need These Pumps

Get Quotation & Leave Message

Please send email to : enquiry@apkpump.com
Or leave message in following form.
@
Please briefly tell us your needs (pump type, working envirment)