1. To carefully check the use of the pump when there is no impact and friction, if there can be friction or impact on the parts and add some paper pad, but also the best to ensure that the use of a certain gap.
2. At the same time to pay attention to monitor the temperature of the bearing, the general bearing temperature can not be greater than 80 degrees Celsius and can not be greater than the background temperature of 40.
3. Packing must should pay attention to the right, not too tight or too loose, common to ensure liquid from the packing gland at a drop of discontinuous leakage.
4. Note from time to time seizing inlet pipe can not appear leakage phenomenon.
5. The should pay attention to the motor and the pump should pay attention to protection of two petition axis line in a straight line.
6. Of seizing power and flow changes, both changes can not touch too much, too much demand investigation sparks.
7. Bearing lubrication oil to note with lubricating grease, as early as possible supply oil quantity; thin oil lubricating oil demand investigation and control body bearing oil benchmark second marking.
8. In the winter , after parking should be as early as possible will release the water pump and pipeline memory.
9. The regular inspection device pump to prevent relaxation.
10. Note that the collapse of checked protection and regular oil changes to make antirust disposed to pump by after a certain period of time .
