Mixed flow pump to consider the transport medium for some of the erosion or natural causes of erosion, it is the construction of a material hard to use some of the corrosion resistance of the material. It is an easy pull type structure of the pump, general centrifugal pump, axial flow pump maintenance and disassembling the impeller and the seal must will be connected in the pipeline of the pump body apart, and mixed flow pump is save the process. Mixed flow pump is not only provided with the diluted oil lubrication of bearings and after precision machining of the pump shaft, in filler cover equipped with protective sleeve. It is generally the seal or seal packing seal with double end mechanical. Oil bearing box, there is a constant level oiler to control. Pump body with legs used to bear loads on all pipe, and will be subject to force transmission to infrastructure, the leg, the rotor from oppression of the bearing load of the pump caused by the bending. Therefore, support feet of the pump body of the rotor to the protection of the role, and the service life of the rotor is greatly increased. Mixed flow pump has a relatively large flow area, more smooth, can reduce the blockage of the transmission medium. The rotation direction of the pump shaft is clockwise along the driving direction. Provide the driving force of the device most of the motor or internal combustion engine. Mixed flow pump device generally will install more complete bleeding device, through the device can be effective to pump the gas discharge, to prevent pump does not look.
