The installation position of the pump should be satisfied with the requirement of the height of the suction on the vacuum, the foundation must be level and steady, so that the rotation direction of the power machine is consistent with the direction of the pump. Water pump and power machine with shaft connection, to ensure that the axis in the same line, in order to prevent the machine operation produce vibration and bearing abrasion on one side; if the use of a tape drive, it should be to the axis parallel to each other, belt wheel is. If there are a number of units in the same room, the unit and the unit, the unit and the wall should be more than 800mm distance. Pump suction pipe must be sealed well, and minimize the elbow and the valve, filling water should be discharged as the air, run pipe should not air accumulation, required suction tube is slightly oblique with the connection of the water inlet of the water pump, intake should be certain submerged depth. Water pump based on the reserved hole, should be based on the size of the pump pouring.
