deep well submersible pump is a motor and pump directly integrated into the water work of the water lifting equipment, with a simple structure, high efficiency unit, low noise, safe and reliable operation, easy installation and maintenance advantages. It is suitable for extraction from deep wells, hot water wells and oceans. It can also be used for extraction of rivers, reservoirs and drains. It is mainly used for farmland irrigation and mountain water consumption in plateau mountain areas. It is also available for cities, factories, railways, mines, Drainage use.
85QJ, 100QJ, 125QJ, 150QJ, 175QJ, 200QJ, 250QJ, 300QJ, 350QJ, 400QJ.
4SP, 6SP, 8SP, 10SP series stainless steel deep well submersible pump
1, motor, pump - body, submerged into the water to run, safe and reliable.
2, no special requirements on the well, as long as the water pipe can withstand the corresponding pressure can be.
3, easy installation and maintenance easy to use, small footprint, no need to build pump room.
4, simple structure, save raw materials.
1, the power frequency of 50Hz, rated voltage of 300v or 660v (tolerance ± 5%) of the three-phase AC power supply.
2, solid content (by mass) not more than 0.01%.
3, the liquid is shouted PH value of 6.5-8.5.
4, the transmission medium temperature does not exceed 100 ℃.
5, the pump inlet must be below the moving water level 1m, but the diving depth does not exceed the static water level to 70m, the lower end of the pump from the bottom of the water depth of at least 1m.
6, the requirements of integrity, well wall smooth, well can not be staggered
