1.In the installation, you need to check parts, such as motor, water pumps, etc., especially the pipeline, whether there are impurities affect the operation, to avoid damage to the parts when working.
2.In order to maximize the performance of the equipment to play, and as far as possible to extend the use of equipment, installation of pipeline equipment should have different support.
3.Due to the temperature limit, in the transmission of high temperature liquid, in order to ensure the pipeline with the force, in the early installation, the bottom bolt is not fixed, and then the pipeline with the temperature change and synchronous movement.
4.Import and export flange specifications need to be consistent with the pipeline configuration specifications.
5.The installation should be installed at the entrance of a filter to avoid the debris into the pump and affect the efficiency of the work or damage to the equipment. In addition, the outlet of the check valve should be installed outside.
6.Due to the scope of application of the centrifugal pump may be in the suction range, so the import and export pipeline to minimize the twists and turns, to ensure that there will be no leakage of water vapor phenomenon.
7.For the whole work and maintenance process can be carried out smoothly, at the time of installation, the inlet and outlet pipe to install a separate regulation and pressure testing equipment to ensure the timely detection and treatment of abnormal situation.
8.A full set of installation is completed, start the test, check whether there is friction and the card dead phenomenon, OK no problem can be put into use.
