There are several ways to improve the life of the non clogging sewage pump and to improve the self absorption capacity:
1. The easiest way: self priming pump sewage pump is set on the road pump suction pipe, pump start before the vacuum pump to start, so filled with water to ensure that the pump pump suction pipe, quick start. This approach requires a sound absorption automatic control system to ensure the normal operation of.
2. Is relatively simple: to reduce the sewage pump inlet pipe elbow, gap height and horizontal distance.
3. A little trouble, but also very easy to use: no clogging sewage pump set in the pump suction tank. This method needs to set in the pump suction pipe of a water tank, in the first run, the tank should be first water on the water, because the water level of the water tank is lower than the water height, inner tube water level is lower than a water tank height, so the water tank can be to store some water, because of the height of the water tank drainage tube (i.e. pump suction pipe) lower than that of the inner cylinder height, it can ensure the pump suction pipe, pump running, water in the water in the water container of water in the swimming pool joined the three tank water, within the water tank through the barrel.
4. Self priming pump suction pipe end suction end valve installation. At the bottom of the suction valve is actually a check valve, it guarantees the water only by the pool into the suction tube can not rotate, so if the straw is filled with water, water pump shaft while above the pool water level, but because of the valve under the action of water, water will not flow into the pipette pool, the inner tube is filled with water to ensure pump can automatically and quickly start.
