There are several aspects that we need to pay attention to in the use of the pump:
Bearing should pay attention to the following matters:
Bearings are precision components, so the use requires a cautious attitude, is changed is the use of high-performance bearings, if used improperly, can not achieve the expected performance results, but also easy to make the bearing damage.
1. To maintain the bearing and the surrounding environment clean even invisible to the naked eye smile dust into the bearing, it will increase the bearing wear, vibration and noise.
2. The use of the installation should be careful not to allow a strong punch, do not allow the use of direct percussion hammer bearings, does not allow the transfer of pressure through the rolling body.
3. The use of appropriate and accurate installation tools to use special tools, to avoid the use of cloth and short fibers and the like.
4. To prevent, the direct use of hands to pick up the bearing bearing corrosion, to fully wash hands sweat, and coated with high quality mineral oil for operations, paying particular attention to rust in the rainy season and summer.
Relatively speaking, the use of new mechanical seal effect is better than the old, but the quality of the new mechanical seal or the material selection is not the time, with the larger size of the error will affect the sealing effect; in polymerization and permeable medium, static ring without excessive wear, or not replaced as well. Because the static ring in the static ring seat for a long time in a static state, so that the polymer and impurities deposited as a whole, has played a good role in sealing.
