Heat pump, heat pump noise is main cause of the bearing damage or heat pump in the circulation due to the high temperature generated cavitation phenomenon and the heat conduction oil pump support instability caused by vibration and other reasons.
Bearing damage should be replaced in a timely manner, so as to avoid damage to other parts of the pump. In addition, the installation of the new customers in the use of heat pump is often the initial use of oil temperature rising too fast or too high oil temperature rise. This will cause the heat transfer oil in the pipeline to produce gas, these gases in the heat transfer process of heat pump through the heat pump will be an instant explosion, so when the heat pump to produce noise.
Heat-conducting oil pump for the first time should be used when shall the temperature gradually increased at the same time start the heat-conducting oil pump, gradually open the exhaust pipe valve to the pipeline gas emission clean after the formal use of heat pump. Then there is a heat pump in the installation of the import and export pipeline is not marked on the support point or the support point is not stable when the heat pump in the use of a strong resonance, so it will produce noise. Should be in a timely manner to the support of the pipeline.
