Many users in the installation and use of
submersible pumps because of relatively shallow pools of water, if the erection of submersible pump and flooded the entire
submersible pump, so directly to the submersible pump submersible pump used to lay down, this approach is not desirable, if the QDX type is a
small submersible pump can also be used but in life will be reduced, because after lying the entire electronic submersible pump rotor weight tend to be lower, there will be friction phenomenon, especially the
submersible pump whenever you just a flat running
submersible pump immediately will be damaged, because of the
deep well pump impeller length, more quantity, but not the rotor will damage the impeller there will be friction phenomenon. So a submersible pump can use the down answer is diving pump can not be used.
If water level is low, you can use a
self suction pumps, or is under a series of BYQDN ceiling on the type of small
stainless steel submersible pump products, the main features of the product is inlet at the bottom of the pump body and motor cooling is mainly by the suction of the liquid through the outlet of the pump body at the top, by the flow of a liquid cooling motor. The only drawback is that the sewage containing particulate impurities can not be transported in the class of medium, if it is only a
small stainless steel self suction pump suction pump or self priming pump products.
If you have purchased a can recline using diving pump products, there is a method is in the water outlet of the
water pump to do a three-way loop pipe to a pump on reflux of water spray to the motor above cooling motor. This method adaptation and relatively small do fish pond oxygen landscape.
