1. Stainless steel centrifugal pump elevation adjustment
Centrifugal pump elevation adjustment is easy to pump and pipeline connection. In general the elevation to pump axis for measuring points, to pump based on calibration of foundation elevation is used as the measuring datum, level connectivity is measured. For the strict requirements of the centrifugal pump, the elevation adjustment with leveling instrument.
2. Stainless steel centrifugal pump to find the level of
Centrifugal pump find first level degree in looking after the elevation, it is through temporary pad iron level adjustment to adjust the level of degree. The level of centrifugal pump adjustment with a precision of 0.02 mm / m level instrument and the pump inlet and outlet flange face or on the pump shaft were measured. The horizontal split pump can level instrument on the level divided into surface or pump shaft and import and export flange surface measurement.
3. Positioning and correction of the centrifugal pump
The positioning of the centrifugal pump and correction is mounting pump based on according to the center line of the vertical and horizontal center line in order to meet the requirements. In the installation process of the centrifugal pump, centrifugal pump for the size of type the and motor share a base, installation are with integral installation method, the pump and motor and frame together as a whole stable hanging to the foundation, and location and correction. For large centrifugal pump usually first frame lifting in place and adjust the center position and level, the pump and motor lifting to the base to adjust the level of degree of coupling shaft end distance.
