All things with a long time will appear some problems, whether it is their own or man-made is possible, it is because of the use of more, the problem will be followed. Therefore, to find a reasonable way to solve is the key. Like the fire pump, it must be a good deal with the. Here let me to introduce some of the problems encountered by the fire pump and its solution.
1. If your fire pump is not provided by the liquid, or the lack of pressure, the supply of liquid is insufficient, the fire pump will not have water injection and exhaust
Treatment methods: it would have to look at is not filled with liquid
2. If the speed is too low
Processing method: that is to look at the wiring of the place there is no problem, the voltage is not normal ah what. It's all clear.
3. The suction process is too high
Processing method: This is going to check the entrance of the pipeline, and see if it is too small and too large caused by the problem, which is caused by a certain degree of friction.
4. The direction of rotation is not right
Treatment method: this child, then, of course, is to go to check the direction of rotation.
5. The pipeline is blocked
Treatment method: like this situation, most of the things are blocked, it should be good to check whether there are obstacles.
6. There is the production of air, as there are problems in the pipeline leak
Treatment method: if there is air, you have to check whether there is a pipeline that has not let the air into the place, the air is not leaked out
7. Pumping out liquid will evaporate
Processing method: This is going to check it, and then ask the factory, but the previous can lead to increase.
Fire pump in the use of the process will be encountered in the above problems and some of the processing methods, encountered these problems, we can do it.
